PCR Multiplex PCR

As autophagy is a multi-step process which includes not just the formation of autophagosomes, but most importantly, flux through the entire system, including the degradation upon fusion with lysosomes, which makes it quite challenging for detection. There are several methods for detection in mammalian cells, including immunoblotting analysis of LC3 and p62 and detection of autophagosome formation/maturation by fluorescence microscopy, Currently, there is no single “gold standard” for determining the autophagic activity that is applicable in every experimental context, hence it is recommended to go for the combined use of multiple methods to accurately assess the autophagic activity in any given biological setting.

Bacterial culture is a process of letting bacteria multiply in a controlled fashion (temperature, humidity, oxygen content or shaking), in a predetermined culture medium (antibiotic resistance to obtain homogenous clones). It is an important step, especially during cloning, as a single cell can be grown homogeneously (on semi-solid or in liquid conditions) to obtain colonies. As mentioned, bacteria can be cultured in broth cultures (Luria broth or LB) or Petri dishes (Agar plates). A specific antibiotic can be added to the broth or agar plates in order to grow bacteria which have the gene insert conferring its resistance to that antibiotic. Following points are necessary to consider for optimal growth conditions: 1. In general, most bacteria grow well at 37C, but there are some strains which require growth temperatures between 25-30C. 2. It is ideal in broth cultures to fill the flask to ⅓ or less of the total flask volume for optimal aerobic growth. 3. Shaking speeds between 140-180 rpm are appropriate to ensure aeration and that the cells are surrounded by fresh media, and do not settle.

Bacterial culture is a process of letting bacteria multiply in a controlled fashion (temperature, humidity, oxygen content or shaking), in a predetermined culture medium (antibiotic resistance to obtain homogenous clones). It is an important step, especially during cloning, as a single cell can be grown homogeneously (on semi-solid or in liquid conditions) to obtain colonies. As mentioned, bacteria can be cultured in broth cultures (Luria broth or LB) or Petri dishes (Agar plates). A specific antibiotic can be added to the broth or agar plates in order to grow bacteria which have the gene insert conferring its resistance to that antibiotic. Following points are necessary to consider for optimal growth conditions: 1. In general, most bacteria grow well at 37C, but there are some strains which require growth temperatures between 25-30C. 2. It is ideal in broth cultures to fill the flask to ⅓ or less of the total flask volume for optimal aerobic growth. 3. Shaking speeds between 140-180 rpm are appropriate to ensure aeration and that the cells are surrounded by fresh media, and do not settle.

Bacterial culture is a process of letting bacteria multiply in a controlled fashion (temperature, humidity, oxygen content or shaking), in a predetermined culture medium (antibiotic resistance to obtain homogenous clones). It is an important step, especially during cloning, as a single cell can be grown homogeneously (on semi-solid or in liquid conditions) to obtain colonies. As mentioned, bacteria can be cultured in broth cultures (Luria broth or LB) or Petri dishes (Agar plates). A specific antibiotic can be added to the broth or agar plates in order to grow bacteria which have the gene insert conferring its resistance to that antibiotic. Following points are necessary to consider for optimal growth conditions: 1. In general, most bacteria grow well at 37C, but there are some strains which require growth temperatures between 25-30C. 2. It is ideal in broth cultures to fill the flask to ⅓ or less of the total flask volume for optimal aerobic growth. 3. Shaking speeds between 140-180 rpm are appropriate to ensure aeration and that the cells are surrounded by fresh media, and do not settle.

Bacterial culture is a process of letting bacteria multiply in a controlled fashion (temperature, humidity, oxygen content or shaking), in a predetermined culture medium (antibiotic resistance to obtain homogenous clones). It is an important step, especially during cloning, as a single cell can be grown homogeneously (on semi-solid or in liquid conditions) to obtain colonies. As mentioned, bacteria can be cultured in broth cultures (Luria broth or LB) or Petri dishes (Agar plates). A specific antibiotic can be added to the broth or agar plates in order to grow bacteria which have the gene insert conferring its resistance to that antibiotic. Following points are necessary to consider for optimal growth conditions: 1. In general, most bacteria grow well at 37C, but there are some strains which require growth temperatures between 25-30C. 2. It is ideal in broth cultures to fill the flask to ⅓ or less of the total flask volume for optimal aerobic growth. 3. Shaking speeds between 140-180 rpm are appropriate to ensure aeration and that the cells are surrounded by fresh media, and do not settle.

A restriction enzyme or restriction endonuclease is defined as a protein that recognizes a specific, short nucleotide sequence and cuts the DNA only at or near that site, known as restriction site or target sequence. The four most common types of restriction enzymes include: Type I (cleaves at sites remote from a recognition site), Type II (cleaves within or at short specific distances from a recognition site), Type III (cleave at sites a short distance from a recognition site), and Type IV (targets modified DNA- methylated, hydroxymethylated and glucosyl-hydroxymethylated DNA). The most common challenges with restriction digest include- 1. inactivation of the enzyme, 2. incomplete or no digestion, and 3. unexpected cleavage. The enzyme should always be stored at -20C and multiple freeze-thaw cycles should be avoided in order to maintain optimal activity. Always use a control DNA digestion with the enzyme to ensure adequate activity (to avoid interference due to high glycerol in the enzyme). For complete digestion, make sure that the enzyme volume is 1/10th of the total reaction volume, the optimal temperature is constantly maintained throughout the reaction, the total reaction time is appropriately calculated based on the amount of DNA to be digested, appropriate buffers should be used to ensure maximal enzymatic activity, and in case of a double digest, make sure that the two restriction sites are far enough so that the activity of one enzyme cannot interfere with the activity of the other. Star activity (or off-target cleavage) and incomplete cleavage are potential challenges which may occur due to suboptimal enzymatic conditions or inappropriate enzyme storage. To avoid these, follow the recommended guidelines for storage and reactions, and always check for the efficacy of digestion along with purification of digested products on an agarose gel.

A restriction enzyme or restriction endonuclease is defined as a protein that recognizes a specific, short nucleotide sequence and cuts the DNA only at or near that site, known as restriction site or target sequence. The four most common types of restriction enzymes inclue: Type I (cleaves at sites remote from a recognition site), Type II (cleaves within or at short specific distances from a recognition site), Type III (cleave at sites a short distance from a recognition site), and Type IV (targets modified DNA- methylated, hydroxymethylated and glucosyl-hydroxymethylated DNA). The most common challenges with restriction digest include- 1. inactivation of enzyme, 2. incomplete or no digestion, and 3. unexpected cleavage. The enzyme should always be stored at -20C and multiple freeze-thaw cycles should be avoided in order to maintain optimal activity. Always use a control DNA digestion with the enzyme to ensure adequate activity (to avoid interference due to high glycerol in the enzyme). For complete digestion, make sure that the enzyme volume is 1/10th of the total reaction volume, optimal temperature is constantly maintained throughout the reaction, the total reaction time is appropriately calculated based on the amount of DNA to be digested, appropriate buffers should be used to ensure maximal enzymatic activity, and in case of a double digest, make sure that the two restriction sites are far enough so that the activity of one enzyme cannot interfere with activity of the other. Star activity (or off-target cleavage) and incomplete cleavage are potential challenges which may occur due to suboptimal enzymatic conditions or inappropriate enzyme storage. To avoid these, follow the recommended guidelines for storage and reactions, and always check for the efficacy of digestion along with purification of digested products on an agarose gel.

A restriction enzyme or restriction endonuclease is defined as a protein that recognizes a specific, short nucleotide sequence and cuts the DNA only at or near that site, known as restriction site or target sequence. The four most common types of restriction enzymes include: Type I (cleaves at sites remote from a recognition site), Type II (cleaves within or at short specific distances from a recognition site), Type III (cleave at sites a short distance from a recognition site), and Type IV (targets modified DNA- methylated, hydroxymethylated and glucosyl-hydroxymethylated DNA). The most common challenges with restriction digest include- 1. inactivation of the enzyme, 2. incomplete or no digestion, and 3. unexpected cleavage. The enzyme should always be stored at -20C and multiple freeze-thaw cycles should be avoided in order to maintain optimal activity. Always use a control DNA digestion with the enzyme to ensure adequate activity (to avoid interference due to high glycerol in the enzyme). For complete digestion, make sure that the enzyme volume is 1/10th of the total reaction volume, the optimal temperature is constantly maintained throughout the reaction, the total reaction time is appropriately calculated based on the amount of DNA to be digested, appropriate buffers should be used to ensure maximal enzymatic activity, and in case of a double digest, make sure that the two restriction sites are far enough so that the activity of one enzyme cannot interfere with the activity of the other. Star activity (or off-target cleavage) and incomplete cleavage are potential challenges which may occur due to suboptimal enzymatic conditions or inappropriate enzyme storage. To avoid these, follow the recommended guidelines for storage and reactions, and always check for the efficacy of digestion along with purification of digested products on an agarose gel.

A restriction enzyme or restriction endonuclease is defined as a protein that recognizes a specific, short nucleotide sequence and cuts the DNA only at or near that site, known as restriction site or target sequence. The four most common types of restriction enzymes include: Type I (cleaves at sites remote from a recognition site), Type II (cleaves within or at short specific distances from a recognition site), Type III (cleave at sites a short distance from a recognition site), and Type IV (targets modified DNA- methylated, hydroxymethylated and glucosyl-hydroxymethylated DNA). The most common challenges with restriction digest include- 1. inactivation of the enzyme, 2. incomplete or no digestion, and 3. unexpected cleavage. The enzyme should always be stored at -20C and multiple freeze-thaw cycles should be avoided in order to maintain optimal activity. Always use a control DNA digestion with the enzyme to ensure adequate activity (to avoid interference due to high glycerol in the enzyme). For complete digestion, make sure that the enzyme volume is 1/10th of the total reaction volume, the optimal temperature is constantly maintained throughout the reaction, the total reaction time is appropriately calculated based on the amount of DNA to be digested, appropriate buffers should be used to ensure maximal enzymatic activity, and in case of a double digest, make sure that the two restriction sites are far enough so that the activity of one enzyme cannot interfere with the activity of the other. Star activity (or off-target cleavage) and incomplete cleavage are potential challenges which may occur due to suboptimal enzymatic conditions or inappropriate enzyme storage. To avoid these, follow the recommended guidelines for storage and reactions, and always check for the efficacy of digestion along with purification of digested products on an agarose gel.

A restriction enzyme or restriction endonuclease is defined as a protein that recognizes a specific, short nucleotide sequence and cuts the DNA only at or near that site, known as restriction site or target sequence. The four most common types of restriction enzymes include: Type I (cleaves at sites remote from a recognition site), Type II (cleaves within or at short specific distances from a recognition site), Type III (cleave at sites a short distance from a recognition site), and Type IV (targets modified DNA- methylated, hydroxymethylated and glucosyl-hydroxymethylated DNA). The most common challenges with restriction digest include- 1. inactivation of the enzyme, 2. incomplete or no digestion, and 3. unexpected cleavage. The enzyme should always be stored at -20C and multiple freeze-thaw cycles should be avoided in order to maintain optimal activity. Always use a control DNA digestion with the enzyme to ensure adequate activity (to avoid interference due to high glycerol in the enzyme). For complete digestion, make sure that the enzyme volume is 1/10th of the total reaction volume, the optimal temperature is constantly maintained throughout the reaction, the total reaction time is appropriately calculated based on the amount of DNA to be digested, appropriate buffers should be used to ensure maximal enzymatic activity, and in case of a double digest, make sure that the two restriction sites are far enough so that the activity of one enzyme cannot interfere with the activity of the other. Star activity (or off-target cleavage) and incomplete cleavage are potential challenges which may occur due to suboptimal enzymatic conditions or inappropriate enzyme storage. To avoid these, follow the recommended guidelines for storage and reactions, and always check for the efficacy of digestion along with purification of digested products on an agarose gel.