No discussions found
Start your discussion
Share your thoughts or question with experts in your field
Start a discussion
Found 3 matching solutions for this experiment
| Upstream tips |
Protocol tips |
Downstream tips |
-Store the unopened kit at 2-8 °C.
-Bring all reagents to room temperature before use.
-Reconstitute the Human Cytochrome c Standard with deionized or distilled water. Allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making dilutions. |
-When mixing or reconstituting protein solutions, always avoid foaming.
-Substrate Solution should remain colorless until added to the plate.
-Keep Substrate solution protected from light.
-Stop Solution should be added to the plate in the same order as the Substrate Solution.
-Wells that are green in color indicate that the Stop Solution has not mixed thoroughly with
the Substrate Solution. |
|
| Upstream tips |
-Store the unopened kit at 2-8 °C.
-Bring all reagents to room temperature before use.
-Reconstitute the Human Cytochrome c Standard with deionized or distilled water. Allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making dilutions. |
| Protocol tips |
-When mixing or reconstituting protein solutions, always avoid foaming.
-Substrate Solution should remain colorless until added to the plate.
-Keep Substrate solution protected from light.
-Stop Solution should be added to the plate in the same order as the Substrate Solution.
-Wells that are green in color indicate that the Stop Solution has not mixed thoroughly with
the Substrate Solution. |
| Upstream tips |
Protocol tips |
Downstream tips |
-Inspect all reagents prior to use. Components should contain no particulates or cloudiness and should be
colorless.
-Prior to using the kit, briefly spin component tubes to collect all reagent at the bottom.
-Equilibrate all materials to room temperature prior to use and use prepare immediately prior to use. |
-Cover microplate while incubating to prevent evaporation.
-Do not allow the microplate wells dry at any point during the assay procedure.
-Avoid causing bubbles or foaming when pipetting, mixing or reconstituting.
|
-Unused well strips should be returned to the original packaging, sealed and stored at 4°C. |
| Upstream tips |
-Inspect all reagents prior to use. Components should contain no particulates or cloudiness and should be
colorless.
-Prior to using the kit, briefly spin component tubes to collect all reagent at the bottom.
-Equilibrate all materials to room temperature prior to use and use prepare immediately prior to use. |
| Protocol tips |
-Cover microplate while incubating to prevent evaporation.
-Do not allow the microplate wells dry at any point during the assay procedure.
-Avoid causing bubbles or foaming when pipetting, mixing or reconstituting.
|
| Downstream tips |
| -Unused well strips should be returned to the original packaging, sealed and stored at 4°C. |
| Upstream tips |
Protocol tips |
Downstream tips |
| -Equilibrate all reagents to room temperature (18-25°C) prior to use. |
-Avoid foaming or bubbles when mixing or reconstituting components.
-Ensure plates are properly sealed or covered during incubation steps.
-Complete removal of all solutions and buffers during wash steps is necessary to minimize background. |
-Unused well strips should be returned to the plate packet and
stored at 4°C. |
| Upstream tips |
| -Equilibrate all reagents to room temperature (18-25°C) prior to use. |
| Protocol tips |
-Avoid foaming or bubbles when mixing or reconstituting components.
-Ensure plates are properly sealed or covered during incubation steps.
-Complete removal of all solutions and buffers during wash steps is necessary to minimize background. |
| Downstream tips |
-Unused well strips should be returned to the plate packet and
stored at 4°C. |
Can't find the product you've used to perform this experiment? It would be great if you can help us by
Adding a product!