No discussions found
Start your discussion
Share your thoughts or question with experts in your field
Start a discussion
Found 3 matching solutions for this experiment
| Upstream tips |
Protocol tips |
Downstream tips |
-Store at 4°C for 6 months, at -20°C for 12 months.
-Avoid multiple freeze-thaw cycles.
-The standard solutions are best used within 2 hours. |
-The diluted Avidin-Biotin-Peroxidase Complex (ABC) solution should not be prepared more than 1 hour prior to the experiment.
-Prepare the substrate solution immediately before use or bring the pre-made substrate to room temperature.
-Sodium azide is an inhibitor of HRP. Do not include the azide in buffers or wash solutions if HRP-labeled conjugate is used for detection. |
|
| Upstream tips |
-Store at 4°C for 6 months, at -20°C for 12 months.
-Avoid multiple freeze-thaw cycles.
-The standard solutions are best used within 2 hours. |
| Protocol tips |
-The diluted Avidin-Biotin-Peroxidase Complex (ABC) solution should not be prepared more than 1 hour prior to the experiment.
-Prepare the substrate solution immediately before use or bring the pre-made substrate to room temperature.
-Sodium azide is an inhibitor of HRP. Do not include the azide in buffers or wash solutions if HRP-labeled conjugate is used for detection. |
| Upstream tips |
Protocol tips |
Downstream tips |
| -Equilibrate all reagents to room temperature (18-25°C) prior to use. |
-Avoid foaming or bubbles when mixing or reconstituting components.
-Ensure plates are properly sealed or covered during incubation steps.
-Complete removal of all solutions and buffers during wash steps is necessary to minimize background. |
-Unused well strips should be returned to the plate packet and
stored at 4°C. |
| Upstream tips |
| -Equilibrate all reagents to room temperature (18-25°C) prior to use. |
| Protocol tips |
-Avoid foaming or bubbles when mixing or reconstituting components.
-Ensure plates are properly sealed or covered during incubation steps.
-Complete removal of all solutions and buffers during wash steps is necessary to minimize background. |
| Downstream tips |
-Unused well strips should be returned to the plate packet and
stored at 4°C. |
| Upstream tips |
Protocol tips |
Downstream tips |
|
-Avoid placing the plate in direct sunlight.
-Immediately measure the absorbance of each well using a spectrophotometer/plate reader with the appropriate absorbance setting.
-The presence of air bubbles in wells may impact the results and it is advisable to spin the plate in a centrifuge. |
|
| Protocol tips |
-Avoid placing the plate in direct sunlight.
-Immediately measure the absorbance of each well using a spectrophotometer/plate reader with the appropriate absorbance setting.
-The presence of air bubbles in wells may impact the results and it is advisable to spin the plate in a centrifuge. |
Can't find the product you've used to perform this experiment? It would be great if you can help us by
Adding a product!