RNA isolation / purification Tissue - Rat Spleen

Isolating RNA from tissues and paraffin-embedded tissue samples can be challenging due to cross-linking of biomolecules and fragmented nucleic acids. The best solution is to slice the tissues into smaller pieces and make a homogenate solution (using tissue homogenizer or grinding liquid nitrogen frozen samples) in presence of RNAse inhibitors. The homogenization process should be carried out on dry ice to maintain the integrity of RNA

4 Matching solutions
2 Discussions

Found 2 discussions for this experiment

Discussion

5 years ago

5 years ago by Paul G. Macon United States

RNA isolation from tissue

How do I extract RNA from animal tissue without using liquid nitrogen? I tried the RNA extraction by using the TRIzol reagent and I homogenize the tissue using polytron homogenizer at room temperature for 30secs is this correct?

Comment View 2 comments

Discussion

5 years ago

5 years ago by Aaron Stege Netherlands

Problem in phase separation after using serum/plasma kit

I used a serum/plasma kit for my serum samples. After the phase separation the samples should have 3 phases: a colourless aqueous phase, a white interphase and a red organic phase. However, in some of my samples there was no aqueous phase unless I wait for an extended period of time. How can I circumvent this problem?

Comment View 2 comments

Share your thoughts or question with experts in your field by adding a discussion!

Found 4 matching solutions for this experiment

RNeasy Mini Kit

Qiagen

Upstream tips	Protocol tips	Downstream tips
	- To yield high RNA, give the column an extra wash with both RW1 and RPE buffers (3 total washes with each buffer).	- Include DNAse treatment for 15-20min. - Ensure EtOH is completely evaporated off of the column prior to elution. Adjust time from 1min to 5 min at 60`C. - Use water to elute the RNA that is warmed to ~60`C.

Protocol tips
- To yield high RNA, give the column an extra wash with both RW1 and RPE buffers (3 total washes with each buffer).
Downstream tips
- Include DNAse treatment for 15-20min. - Ensure EtOH is completely evaporated off of the column prior to elution. Adjust time from 1min to 5 min at 60`C. - Use water to elute the RNA that is warmed to ~60`C.

Manufacturer protocol Publication protocol 1 Relevant paper

PAXgene Tissue RNA/miRNA Kit

PreAnalytiX

Upstream tips	Protocol tips	Downstream tips
	- Add β-Mercaptoethanol (β-ME) to Buffer TM1 before use. - Buffer TM1 and Buffer TM2 may form a precipitate during storage. If necessary, warm to 37°C to dissolve - Before using carrier RNA for the first time, dissolve it (310 µg) in 1 ml RNase-free water.

Protocol tips
- Add β-Mercaptoethanol (β-ME) to Buffer TM1 before use. - Buffer TM1 and Buffer TM2 may form a precipitate during storage. If necessary, warm to 37°C to dissolve - Before using carrier RNA for the first time, dissolve it (310 µg) in 1 ml RNase-free water.

Manufacturer protocol Publication protocol 1 Relevant paper

miRNeasy FFPE Kit

Qiagen

Upstream tips	Protocol tips	Downstream tips
- To allow complete penetration by formalin, use tissue samples less than 5 mm thick	- Perform all centrifugation steps using a microcentrifuge placed at 15–25°C	- Do not exceed fixation time of 24 hours as it results in poor performance in downstream assay

Upstream tips
- To allow complete penetration by formalin, use tissue samples less than 5 mm thick
Protocol tips
- Perform all centrifugation steps using a microcentrifuge placed at 15–25°C
Downstream tips
- Do not exceed fixation time of 24 hours as it results in poor performance in downstream assay

Manufacturer protocol Publication protocol 1 Relevant paper

NucleoSpin® RNA

Macherey Nagel

Upstream tips	Protocol tips	Downstream tips
- Aliquot rDNase and store at -20 °C.	- Dry the columns very well after the ethanol wash by adding an additional 2' >10000 rpm centrifuge with no buffer.

Upstream tips
- Aliquot rDNase and store at -20 °C.
Protocol tips
- Dry the columns very well after the ethanol wash by adding an additional 2' >10000 rpm centrifuge with no buffer.

Publication protocol 1 Relevant paper

Can't find the product you've used to perform this experiment? It would be great if you can help us by Adding a product!

Outsource your experiment

Fill out your contact details and receive price quotes in your Inbox

Outsource experiment