PerCP-Cy™5.5 Mouse Anti-Human HLA-DR

Flow cytometry Anti-bodies Human - HLA-DR

Experiment
Flow cytometry Anti-bodies Human - HLA-DR
Product
PerCP-Cy™5.5 Mouse Anti-Human HLA-DR from BD Biosciences
Manufacturer
BD Biosciences

Protocol tips

Protocol tips
Human MSC (5 × 105 cells) were suspended in PBS and incubated with combinations of the monoclonal antibodies described above and also was acquired hMSC unstained used as control.
Downstream tips
A total of 100,000 events were acquired (at low speed). Data were analyzed using the Infinicyt program (Cytognos, Salamanca, Spain)

Publication protocol

"The following monoclonal antibodies (mouse anti-human) were used for flow cytometric immunophenotyping of hMSC-EV and hMSC: CD90 FITC (Fluorescein isothiocyanate), CD34 FITC, CD44 PE (phycoerythrin), CD73 PE, CD14 PE, CD63 PE, CD166 PerCP-Cy 5.5 (phycoerythrin-cyanine 5.5), CD34 PerCP-Cy5.5, CD45 PerCP-Cy5.5, HLA-DR PerCP-Cy5.5, CD19 PerCP-Cy5.5, CD81 APCH7 (APC-cyanine tandem dye), CD45 V500 (BD Horizon V500), CD44 APC (Allophycocyanin) and CD105 APC. All of them were purchased from BD Biosciences (San José, CA) except for CD44 APC, Cytognos (Salamanca) and CD105 (R&D Systems, Minneapolis, MN, USA) purchased from Cytognos and R&D systems, respectively. We used a FACSCalibur flow cytometer (BD Biosciences) for hMSC sample acquisition. The FACSCalibur flow cytometer is a 4-color instrument with two lasers, blue (488-nm) and red (633 nm). Labeled cells were acquired immediately after the staining using a FACSCalibur flow cytometer equipped with the CellQuestTM program (BD Biosciences).

Human MSC were characterized using the following conjugated monoclonal antibody combinations: CD34 FITC/CD73 PE/CD45 PerCPCy5.5/CD105, CD44 FITC/CD14 PE/CD19 PerCPCy5.5 and CD90 FITC/CD166 PE/HLA-DR PerCPCy5.5. Human MSC (5 × 105 cells) were suspended in PBS and incubated with combinations of the monoclonal antibodies described above and also was acquired hMSC unstained used as control.

We used a FACSCanto II flow cytometer (BD Biosciences San Jose, CA) for EV acquisition using the FACSDiva 6.1 software (BD Biosciences). The FACSCanto II flow cytometer is an 8-color instrument with 3 lasers, blue (488-nm, air cooled, 20-mW solid state), red (633 nm, 17-mW HeNe) and violet (405 nm, 30-mW solid state).

For FACSCanto II flow cytometer calibration, we used SPHERO™ Rainbow Calibration Particles (Rainbow Calibration, eight peaks-Spherotech, Inc. Lake Forest, USA), following the recommendation of the EuroFlow consortium [50], with adaptation of light scatter detectors channels to properly identify the EV. For fluorescence compensation, BD™ CompBeads (BD Biosciences, San José, CA, USA) were used with generic and with the fluorochrome-label antibodies used in our experiments. Samples were acquired after daily evaluation of instrument’s performance using the Rainbow beads particles. These particles were also used to identify the electronic noise or background, which comes primarily from extraneous particles reaching the detector (light scatter) [9]. The samples were acquired after the cytometer was calibrated and compensated.

Before EV acquisition, the instrument was washed with rinse solution and with double filtered PBS (through 0.2 μm membrane Millipore filters) after 6 h of sedimentation, to reduce the instrument background noise (Fig. ​(Fig.1).1). The forward scatter component (FSC) parameter is used to determine the EV size. Double-filtered PBS was acquired with a mix of fluorescent beads composed of varied diameters (0.5, 0.9 and 3 μm) Megamix (Biocytex, Marseille, France) and perfect-Count Microespheres (Cytognos, Salamanca, Spain) of 6–6,4 μm in size. The beads of different sizes were used in all of the experiments, with this approach we validated our instrument basis on the capacity to discriminate between 0.5 and 0.9 μm Megamix beads using the FSC parameter, as well as their background noise. The acquisition of the samples was only performed when the number of double-filtered PBS events acquired per second ranged between 25 and 50 at low speed with threshold settings between 300 and 350. EV recovered from ultracentrifugation were suspended in double filtered PBS and stained by direct immunofluorescence using monoclonal antibodies. For the study of antigen expression, samples were incubated in the dark with the appropriate combination of monoclonal antibodies during 15 min. For the optimization of the immunophenotypic characterization of EV released from hMSC by FCM, in the immunophenotypic panel hMSC markers (CD90, CD44 and CD73), negative markers of hMSC (CD34 and CD45) and EV markers (CD81 and CD63) were included. Samples were incubated for 15 min in the dark using an 6-color combination, set up with the following monoclonal antibody panel: 5 μl of anti-CD90-FITC/ 10 μl of anti-CD73-PE or anti-CD63-PE/10 μl of anti-CD34-PerCPCy5.5/5 μl of anti-CD44-APC/ 5 μl of anti-CD81-APCH7/5 μl of anti-CD45-V500. After incubation the excess of antibodies was washed with double filtered PBS at 2000 g for 10 min. The final volume (suspended cells, MoAbs, PBS and 500 μl Megamix beads) was 700 μl.
To analyze if the antibodies indicated above do not form aggregates we used as negative control the double-filtered PBS containing each single antibody as well as the combination of all the antibodies used. The doubled filtered PBS was stained following the same methodology as EV (Additional file 1: Figure S2 and Additional file 2: Figure S3). Data were acquired immediately after the staining. In all samples, EV not labeled with the different antibodies were used to discriminate the positive and the negative population.

A total of 100,000 events were acquired (at low speed). Data were analyzed using the Infinicyt program (Cytognos, Salamanca, Spain)."

Full paper   Login or join for free to view the full paper.

Reviews

PerCP-Cy™5.5 Mouse Anti-Human HLA-DR from BD Biosciences has not yet been reviewed for this experiment

We'd love it if you would be the first to write a review!

Discussion

Start your discussion

Share your thoughts or question with experts in your field

Start a discussion

Papers

Check out relevant papers found by Labettor's AI that are relevant for performing Flow cytometry Anti-bodies Human - HLA-DR using PerCP-Cy™5.5 Mouse Anti-Human HLA-DR from BD Biosciences.

View full paper   Login or join for free to view the full paper.

Manufacturer protocol

Download the product protocol from BD Biosciences for PerCP-Cy™5.5 Mouse Anti-Human HLA-DR below.

Download PDF Download manufacturer protocol

Videos

Check out videos that might be relevant for performing Flow cytometry Anti-bodies Human - HLA-DR using PerCP-Cy™5.5 Mouse Anti-Human HLA-DR from BD Biosciences. Please note that these videos are representative and steps or experiment specific processes must be kept in mind to expect desired results.

We haven't found any additional videos for this experiment / product combination yet.

Outsource your experiment

Fill out your contact details and receive price quotes in your Inbox

  Outsource experiment
Become shareholder Discussions About us Contact Privacy Terms